Archive for January, 2012

« Older Entries

Bainbridge Geothermal Installation Question: How Effective Is Geothermal Heating?

Monday, January 30th, 2012

Geothermal heating is an efficient way to use the Earth’s natural resources to heat a building’s interior in Bainbridge. But is it an effective way?

Consider the cost of geothermal heating. Once you get past the initial installation costs of a geothermal heating system, which are higher than other conventional heating systems, its operating costs are much lower because of its use of a natural, renewable heat source – the Earth. If you plan to stay in your home for many years, a geothermal heating system will likely pay for itself because according to International Ground Source Heat Pump Association, geothermal operating efficiencies are 50-70% higher than other heating systems, which represents a substantial lowering of energy costs.

And according to a leading electric utility company, the cost of electricity for operating a geothermal heat pump is lower than any other heating system which includes natural gas, propane, and oil.

Beyond lower energy costs, geothermal heating leaves a smaller carbon footprint than other heating systems. According to the U.S. Environmental Protection Agency, carbon dioxide (CO2) emissions from the average U.S. home is 17%, most of which comes from burning fossil fuels for electricity. Geothermal uses natural heat from the ground and therefore uses 30-60% less energy than more conventional heating and cooling systems. Using less energy equals less carbon dioxide production.

A geothermal heating system is only as effective as the equipment used to deliver it throughout the building. The most common delivery method is through a ground source heat pump. This pump pulls the heat from the earth and distributes it.

The components of a geothermal system also include a compressor, air handling unit, and duct system. When all are installed and maintained correctly, a geothermal heating system will be just as effective in heating a building’s interior as any other heating system. Just be sure you hire a qualified Bainbridge heating contractor to install and service your geothermal heating system.

Tags: , , , ,
Posted in Geothermal | Comments Off

Bedford Heights Heating Replacement Tip: What You Should Consider Before Upgrading

Friday, January 27th, 2012

Many Bedford Heights homeowners who heat their homes with an older heating system—whether it’s a furnace, boiler, or heat pump—may want to consider upgrading to a more efficient system. Older furnaces with an AFUE rating of less than 80%, for instance, could be costing you a lot more than you realize in heating bills.

While it is a significant initial investment, upgrading to a more efficient furnace or heat pump will pay for itself in energy savings. Before you decide on whether or not an upgrade is right for your home, here are some things to keep in mind.

Fuel Costs

Some types of fuel, such as electricity, are more expensive in certain areas. Depending on where you live, you may want to compare the cost of fuel before choosing a heating upgrade. In fact, natural gas may or may not be available to your home. Check with your utility company to find out what types of fuel are available and which ones would be more cost-efficient for heating your home. You can always call a qualified HVAC technician at Apple Heating & Cooling if you have any questions about a heating system upgrade or the products we offer.

Insulation

Whenever you are thinking about upgrading your heating system, you’ll want to make sure your home is properly insulated and sealed. If you purchase and install a highly efficient furnace, it won’t save as much in energy bills if your house is poorly insulated. Get a home energy audit with a local energy resource organization if you aren’t sure. You might want to also consider upgrading your old windows and doors, or installing storm doors and windows to improve air tightness.

Property Value

A lot of homeowners forget that any upgrade or remodeling project will increase the value of their home. Not only will a heating system upgrade lower your heating bills; it will also add value to your home and property. Always make sure you choose the right system for your home so that it lasts as long as possible.

If you are considering upgrading the heating system in your Bedford Heights home, call Apple Heating & Cooling to speak with one of our HVAC experts to ask about our quality products and installation services.

Tags: , , , , , ,
Posted in Heating | Comments Off

Kirtland Hills Heating Installation Guide: Pros and Cons of Various Heating Systems

Wednesday, January 25th, 2012

When it comes time to install a new heating system in your Kirtland Hills home, there are a lot of options to consider. Many people get overwhelmed when confronted with all of the furnaces, boilers and heat pumps on the market these days. So, to help you get a handle on what each has to offer and which will offer you the best benefits, here is an overview of the modern heating system market.

Furnaces

Furnaces are the core of a forced air heating system and use gas, oil or electricity to heat air which is then circulated through your home by a blower in your air handler. Furnaces are among the most fuel efficient heating systems on the market today with options available at up to 95% AFUE (meaning it uses up to 95% of the fuel consumed to produce heat). They are also inexpensive to install and while they don’t last quite as long as boilers, they are highly efficient when well cared for.

Boilers

Boilers use gas, oil or electricity to heat water or steam which is then circulated through your home into radiators or baseboard heaters. The heated water or steam releases heat into your home and heats it in turn. While not quite as energy efficient as a high efficiency furnace, boiler heat is perfect for homes with existing radiators and no room for vents and ductwork. It also has less of an impact on indoor air quality since there is no air movement and boilers tend to last a very long time when well maintained.

Heat Pumps

Heat pumps are becoming increasingly popular, especially in milder climates where it rarely gets below 40 degrees F. A heat pump uses the same technology as an air conditioner to extract heat from outside using a compressor, evaporator coils, and condenser coils with refrigerant.

It is most efficient in the spring and fall when temperatures are mild, but it uses much less energy than either a boiler or furnace and it can be used in the summer to cool your Kirtland Hills home.

Tags: , , , , , , ,
Posted in Heat Pumps | Comments Off

$25 off a Low Level CO Detector

Monday, January 23rd, 2012

This week only, we are offering $25 off a Low Level CO Detector!

Just as you wouldn’t live in a house without smoke detectors, you should invest in a quality, low level carbon monoxide detector. Carbon monoxide poisoning can be very dangerous and even deadly, and since CO is colorless and odorless it can be very difficult to detect. A low level CO detector will detect carbon monoxide at as little as 10 parts per million, so you and your family are warned of any potential problems early. Be safe this winter, and always call a professional if you suspect you have a CO leak!

Offer expires 1/29/2012

Tags: , ,
Posted in Promo | Comments Off

Munson Township Heating Replacement Guide: 5 Reasons to Replace Your Furnace

Friday, January 20th, 2012

Many Munson Township homes are heated with furnaces, since they generally provide safe and efficient heat.  Furnaces have also improved dramatically over the years as manufacturers find ways to make them more efficient. Even if your furnace has been reliable for many years, it may be worth the money to replace your old furnace with a newer, more efficient model.

Here are five major benefits to upgrading your furnace.

1. Lowering Your Utility Bills

Whether you realize it or not, your current furnace could be costing you more than it should in heating bills. If your furnace is 15-20 years old, it’s probably not heating your home as efficiently as the newer models with higher AFUE ratings. Even if your heating system has been replaced within the last ten years, the technology has advanced enough to consider an upgrade.

2. Fewer Repairs

Repair costs can add up if you are constantly repairing your furnace. Routine maintenance for your furnace can help reduce the need for repairs, but as furnaces age, they tend to need more repairs and replacement parts. If you need frequent repairs for your furnace, it may be time to replace it with a newer one.

3. More Consistent Heat

While maintaining consistent temperatures throughout your home involves several factors, such as insulation and thermostat control, your furnace could also be the reason you aren’t getting enough heat to all parts of the house. If some rooms are colder than others, or if your heating bills have recently gone up, it may be time for a furnace replacement.

4. Reduce the Chances of a Breakdown

When a furnace breaks down, it not only leaves you without heat, but it is also a major expense. Budgeting for a new furnace before it breaks down will put less financial burden on you than needing an emergency furnace replacement. Newer model furnaces are also more reliable and less likely to give you problems if maintained properly.

5. Safety

There’s higher potential for safety concerns with older or poorly maintained furnaces. In addition to fire hazards, carbon monoxide poisoning is another serious threat. When the heat exchanger stops working because it’s corroded or faulty, carbon monoxide can leak into the home. If you’ve had your furnace for more than 20 years, it could create safety hazards that you may be unaware of.

No matter how long you’ve had the furnace in your Munson Township home, it’s always wise to speak with a qualified HVAC technician about furnace upgrades, particularly if you have expensive heating costs.

Tags: , , , , ,
Posted in Heating | Comments Off

Kingsville Heat Pump Tip: Ice and Snow Covered Heat Pump

Wednesday, January 18th, 2012

It’s very common for heat pumps in Kingsville to ice over in the winter time. It can be due to freezing temperatures and icing outside or it could be due to constant running of the heat pump or excess moisture on the coils. However, while a bit of ice on the heat pump is relatively normal, the entire unit should never be covered in ice – such a thing is not only hard on the machinery; it can result in no heat for your home.

How to Handle Ice and Snow on the Heat Pump

Should your heat pump become covered in ice or snow in the winter time, there are a few things you can do and some things you should not do. First, check to make sure the problem isn’t related to a broken defrost cycle timer. The heat pump should go into a defrost cycle every 30-90 minutes to keep excess ice from building up. If this doesn’t happen, it should be inspected for a thermostat or sensor problem.

To actually remove the ice from the unit, never use a sharp object to pick the ice clear. You can easily damage the coils or another part of the unit and leave it permanently broken. The best way to remove ice from your heat pump is to rinse it off with a hose – even cold water will remove ice. Just be sure the defrost cycle is ready to come back on so the water used to rinse away the ice doesn’t freeze.

Remember to check your emergency heating source and make sure it is switched on while this is happening. Your heat pump likely won’t work properly while iced over and if it is left in the on position, excess stress on the device will cause damage.

To avoid this kind of damage, turn off the heat pump and turn on your emergency heating source, then clear away the ice and check the defrost timer. If everything works properly, turn the heat pump back on, but if you find any problems, call a professional to do a more thorough inspection of the device before you use it again.

Tags: , , , , , ,
Posted in Heat Pumps | Comments Off

Happy Martin Luther King Day from Your Greater Cleveland Area HVAC Contractor!

Monday, January 16th, 2012

Happy Martin Luther King Day! This holiday is not just about celebrating civil rights but also about serving your community. If you have the day off today, why not try spending it helping others? From volunteering at an animal shelter to helping the homeless, there are hundreds of ways you can make your community a better place to live. Have a great holiday!

Tags:
Posted in Holiday | Comments Off

Austinburg Heating Repair Guide: Furnace Air Temperature

Friday, January 13th, 2012

When your furnace turns on every day and warms your Austinburg home, just how hot is the air being blown through your vents? It’s a common question and while it varies depending on the type of furnace you have and the length of your ductwork, normally, the air is about the same temperature in most homes.

The Heating Process

When you turn on your furnace, it ignites fuel (gas or oil) or heats elements (electricity). A blower fan blows air through the heat exchanger and then into ductwork that distributes the heated air to vents around your home. When the combustion occurs and air is first heated, the temperature is between 140 degrees F and 170 degrees F.

This is extremely warm and could be dangerous to anyone if they got too close to it or it was blown directly into your home. However, as the heated air is distributed into your home it starts to cool. In some cases, it loses a significant amount of its energy in the ductwork.

This is intended, of course, because the temperature would be much too high if it was distributed directly to your rooms. That’s why high velocity ductwork often requires regulation to avoid overheating of the air. Cooling like this is normal and results in a better, more evenly distributed airflow.

When Something’s Wrong

To know something is wrong with your heating system, you must first understand what temperature air normally is when distributed through the vents. This will vary depending on which room you are in and how big your home (and furnace) are. However, if you notice a sharp drop off in comfort level in your home, it takes longer to heat rooms when cold or if that heating is suddenly uneven, it may be time for someone to inspect your furnace and check for potential problems.

A technician will then check to see if the air is being heated to the target 140-170 degrees F or if heat is being lost in the air handler or ductwork. There are a number of issues that can contribute to lost heat in your heating system – the easiest way to be sure the problem is solved properly is to call an Austinburg professional when you notice the problem.

Tags: , , , , , ,
Posted in Heating | Comments Off

Mayfield Village Heating Guide: Geothermal Myths

Wednesday, January 11th, 2012

As with any misunderstood technology, there are a lot of myths and misconceptions concerning geothermal heat pumps and how well they work. While these types of systems certainly have their limitations, the same is true of just about any type of heating and cooling system you could have installed in your Mayfield Village home. But if you are really trying to evaluate whether or not a geothermal heating system is right for your home, you need to know exactly what is true about these systems and what is just not true.

For instance, there is a widely held belief that geothermal energy is not a viable heating option in areas with harsh winters. The fact is, though, that even when the air temperature outside is below freezing, the temperature several feet below ground can be as high as 55°F.

With a ground temperature like that, a geothermal heat pump will have no trouble extracting enough heat to keep your home comfortable even when it is well below freezing outside. And even when the ground freezes, the frost usually only extends three or four feet below the surface. Since the pipes for your geothermal heat pump will be at least four feet down, the frost should not affect them at all.

Also, it is common for people to assume that geothermal heat pumps will always need to have a regular heating system in place to serve as a backup. In fact, a geothermal heat pump is quite capable of providing consistent and adequate heating for your entire house as long as it is properly sized and installed. Make sure you are dealing with an experienced and qualified contractor and you will have no problems along these lines.

There are also plenty of myths floating around out there that geothermal heat pumps are just too expensive to make sense as a home heating solution. The truth is that geothermal heating costs almost nothing to operate.

While it is true the geothermal systems are quite a bit more expensive to install than many of the other options, alternative heating systems will still cost a significant amount to install and you will also have to pay much more to operate them on a regular basis. With a geothermal heating system, you pay quite a bit up front, but it is a one-time cost and there will be minimal monthly heating bills after that.

Tags: , , , ,
Posted in Geothermal | Comments Off

$100 off Blue Tube UV Lights

Monday, January 9th, 2012

Apple Heating is offering a special deal – $100 off Blue Tube UV lights! UV lights can make your whole house safer and healthier this winter while it is sealed up tight against the cold. UV germicidal lights kill bacteria and viruses in your home’s air, helping to keep your family from getting sick or spreading illness to other family members. While this system cannot prevent germs entirely, it can remove them from the air you circulate through your home comfort system.  Take advantage of this great deal and cut down on winter colds and flus!

Offer expires 2/29/2012

Tags: , ,
Posted in Promo | Comments Off

« Older Entries