Posts Tagged ‘Bainbridge’

Bainbridge Geothermal Installation Question: How Effective Is Geothermal Heating?

Monday, January 30th, 2012

Geothermal heating is an efficient way to use the Earth’s natural resources to heat a building’s interior in Bainbridge. But is it an effective way?

Consider the cost of geothermal heating. Once you get past the initial installation costs of a geothermal heating system, which are higher than other conventional heating systems, its operating costs are much lower because of its use of a natural, renewable heat source – the Earth. If you plan to stay in your home for many years, a geothermal heating system will likely pay for itself because according to International Ground Source Heat Pump Association, geothermal operating efficiencies are 50-70% higher than other heating systems, which represents a substantial lowering of energy costs.

And according to a leading electric utility company, the cost of electricity for operating a geothermal heat pump is lower than any other heating system which includes natural gas, propane, and oil.

Beyond lower energy costs, geothermal heating leaves a smaller carbon footprint than other heating systems. According to the U.S. Environmental Protection Agency, carbon dioxide (CO2) emissions from the average U.S. home is 17%, most of which comes from burning fossil fuels for electricity. Geothermal uses natural heat from the ground and therefore uses 30-60% less energy than more conventional heating and cooling systems. Using less energy equals less carbon dioxide production.

A geothermal heating system is only as effective as the equipment used to deliver it throughout the building. The most common delivery method is through a ground source heat pump. This pump pulls the heat from the earth and distributes it.

The components of a geothermal system also include a compressor, air handling unit, and duct system. When all are installed and maintained correctly, a geothermal heating system will be just as effective in heating a building’s interior as any other heating system. Just be sure you hire a qualified Bainbridge heating contractor to install and service your geothermal heating system.

Tags: , , , ,
Posted in Geothermal | Comments Off

What to do if Your Heating System Breaks: A Tip from Bainbridge

Monday, November 7th, 2011

What if the heart of your Bainbridge home’s heating system – the furnace – stops working? The warm air that used to flow from your vents has been replaced by a chilly draft. It isn’t time to panic, but it is time to take action. Before you do anything, determine why the furnace stopped working. It may be something as simple as a tripped circuit breaker in your electrical panel. Check the circuit breakers first.

The pilot light in your furnace may have blown out. It can be re-lit if you follow the directions in your furnace owner’s manual. You can find answers on how to re-light a pilot light on the Internet, too.

If the shutdown has not been caused by an electrical or pilot light failure, there is still no need to panic. But another obvious question is: did you pay your last gas bill? Maybe you had a shutoff notice and either ignored it or forgot about it.

Now that you are convinced that the furnace has pooped out, here are some things you should do. First, find the name of a qualified heating and cooling professional. If you already use a heating contractor, contact them and schedule a service call.

While you are waiting for help to arrive, ensure that everyone is safe and accounted for. Make sure pets are nearby and protected from the cold, too. What you don’t want to do is use any appliance to keep you warm that is not designed to keep you warm, like a stove. If you have electric space heaters or propane heaters, carefully locate them in a well vented room (windows open a bit or portable fans circulating air). You don’t want any build-up of gases from fossil burning appliances, gases which could contain deadly carbon monoxide.

Huddle up everyone into a room and break out lots of blankets. You may even want to make an “adventure” of this – find a movie to watch and pop up a bunch of popcorn.  If your waiting time is more than 24 hours, you might want to call up a friend or relative and make arrangements to spend the night with them.

The main thing to remember is not to panic. Most qualified heating contractors, knowing the circumstances, will send out a repair person in a matter of minutes or within one or two hours. Just remember to avoid keeping warm by using unvented heating devices.

Tags: , , , , ,
Posted in Heating | Comments Off

Make Your Heating System More Energy Efficient: A Guide from Bainbridge

Wednesday, October 26th, 2011

Energy efficiency is what you want when it comes to heating your Bainbridge home. You want a furnace that provides the greatest degree of accurate indoor comfort while at the same time operating at peak efficiency to reduce energy usage and lower utility bills. That’s seems like a lot to ask of a simple mechanical system but you should expect it out of the furnace in your basement, attic, or mechanical room.

It is especially important today as energy costs have steadily increased, including electricity, natural and propane gas, and oil. The best way to combat rising prices is to have a furnace that uses less energy. It is a simple statement but one that bears repeating: higher efficiency equals lower operating costs.

Here are some ways to make your heating system more energy efficient:

  1. Clean or replace furnace filters on a regular basis. A dirty or clogged filter will make your furnace work harder and become much less energy efficient. Monthly or quarterly cleaning or replacements are easy to do and will result greater operating efficiencies.
  2. Inspect your home’s ventilation system for accumulation of dirt, dust, or debris. Have you recently added new carpeting? Do your pets shed? Is there a large number of people living in your home? If you answered yes to any of these questions you may need to inspect your ventilation system. You may need to remove the ventilation grilles to take a closer look. Wiping down the inside of your duct work or vacuuming the duct work with a hose attachment will often do the trick. You can also schedule a duct cleaning with a local professional duct cleaning contractor.
  3. Remove obstructions from around vents and grilles. You need a clean path for air to flow into and out of rooms. Restricted airflow makes your furnace work harder and become less energy efficient.
  4. Consider an upgrade to a two-speed or variable speed furnace. Most older furnaces operated on one speed, which cycled on and off and consumed a lot of energy. Today’s furnaces operate at lower speeds, consuming less energy and often remaining on to keep a steady airflow and prevent constant on and off cycling. These newer furnaces are much more energy efficient and cost less to operate.
  5. Adhere to a regular schedule of planned furnace maintenance. If you don’t clean and inspect your furnace on a regular basis, schedule service calls with a local qualified heating contractor. Your contractor will likely have a service agreement plan to fit your budget, which allows for annual inspections, priority emergency service calls, and discounts on parts and services.

Besides saving on energy costs, your efficient furnace will leave a smaller carbon footprint. Your efficient furnace will exhaust less carbon dioxide into the atmosphere and maintain a more green profile. And being ecologically friendly can be just as important as saving money.

You can be assured that an energy efficient heating system will keep more money in your pocket this fall and winter.

Tags: , , , , , ,
Posted in Heating | Comments Off

Troubleshooting Thermostat Issues: Is it the Thermostat or Something Else? A Guide from Dorset

Friday, October 21st, 2011

If your Dorset home’s temperature is too hot or cold, what is the first thing you check? Probably the thermostat. If you are a homeowner, you probably have played around with the setting on a thermostat, much to the chagrin of other occupants who don’t share your same comfort level. And if you try and adjust a thermostat at work – well forget about it. Most companies now have locking thermostats or “false” ones that don’t actually connect to the heating and cooling system.

So if you have a temperature problem, is it really the thermostat that causes it? Maybe yes and maybe no. One physical characteristic to check is the location of the thermostat. If it is in a drafty hallway or near a heat source, it only reads the temperature for that area and other parts of the building are neglected. You will often find more than one thermostat in a home that is tied into more than one furnace or air conditioner.

The older more popular round thermostats are manually controlled and do not adjust to any conditions in the home. They simply control the heating and cooling functions based on a human turning a dial. It’s as simple as that. So if you use this method to adjust the temperatures, blame yourself and not the thermostat. You might want to consider installing a digital, programmable thermostat.

With that in mind, let’s look at some typical ways to troubleshoot a thermostat.

  • Check the anticipator, which is a small metal tab on the front of the printed scale. Give it a light push in either direction. It may be stuck.
  • Clean the interior of the thermostat housing and clean the contacts (small metal plates)
  • Check loose wires or wires that may be corroded.
  • Read the thermostat manual (if not available, look online) for other tips such as ensuring there is voltage to the terminals.

If you have checked everything and the thermostat seems to be in working order, look for other things within the heating & cooling system. These include blocked or restricted registers and vents, leaks or cracks in ductwork, and dirty air handling filters.

Tags: , , , , , ,
Posted in Heating | Comments Off

When Should You Replace Your Existing Heat Pump? A Question From Bainbridge

Monday, September 26th, 2011

Nobody wants to think about having to replace their Bainbridge home’s heating and cooling system. It’s a big job and a new system probably won’t come cheap – not if it’s worth buying anyway. But in the end, you’ll be better off replacing your heat pump sooner rather than later if you start noticing signs that it may be on its way out.

So what are these signs? Well, they’re actually pretty easy to recognize if you know what to look for. For instance, if your heat pump is suddenly making more noise than it used to, there’s a good chance that something’s going wrong inside. This may only require a minor repair, but if minor repairs like this become a regular occurrence, you should start seriously thinking about looking around for a new system.

The cost of even minor repairs will certainly add up quickly over time, and you’ll have to seriously think about whether it makes financial sense to continue to repair an older system rather than simply replacing it with a new one. Chances are that you’ll have to invest in a new one anyway, and the sooner you do it, the less you’ll have paid for repairs to a system you were just going to get rid of anyway.

Also, if you’re starting to notice humidity problems in your home or if some parts of your house are being kept warmer than others, it may very well be a sign that you heat pump isn’t working like it should. Again, this can sometimes be rectified with repair work, but especially if your heat pump is 10 years old or more, it probably makes more sense to replace it.

Another item to keep an eye on when you’re worried about how well your heat pump is working is your monthly energy bill. If you notice a sudden or even a gradual but steady increase over time that you know isn’t a result of an increase in energy prices in your area, you should suspect that your heat pump isn’t working like it should.

Even if it’s still keeping your home at a comfortable temperature, the fact that your heat pump is using more energy to do it is a sign that there’s something wrong with your system. Plus, newer systems are generally more energy efficient anyway, so you’ll be making up for the initial investment of purchasing a new system when you start paying even less on your monthly energy bills.

Tags: , , ,
Posted in Heat Pumps | Comments Off

I Have a Room that Won’t Stay Warm or Cool, What Should I Do? A Question From Bainbridge

Friday, September 23rd, 2011

When you have a home heating or cooling system installed in Bainbridge, you expect it to keep all areas of your home at the same temperature unless you tell it otherwise. But sometimes you’ll find that one of the rooms in your home just won’t stay warm no matter how high you turn up the heat. This can be a very frustrating situation, particularly if that room is one you use a lot.

Ductwork Checkups

It’s time to have someone examine your ductwork to see if it’s properly pressurized throughout or if there could be a break in the system somewhere leading to that room. If your home comfort system pumps heated and cooled air towards that room and that air is allowed to leak out along the way, you’ll never be able to maintain the comfort level you want.

Digging Deeper for Causes

Even if there is no break on the way to that particular room, a leak or blockage somewhere else can throw off the balance of the entire system, reducing how much temperature controlled air can reach that part of your home. These are all things that a professional duct sealer can find and fix for you relatively easily and inexpensively.

Of course, it’s always possible that uneven heating and cooling is a symptom of a larger problem in your home heating and cooling system. But if that’s the case, you’re better off finding out sooner rather than later because the problem will only get worse when not addressed. No matter what the ultimate underlying cause for your uneven heating and cooling is, you’ll need a professional to come out and investigate before you can have it fixed for good.

Tags: , , , , ,
Posted in Indoor Air Quality | Comments Off