Posts Tagged ‘Chardon’

Chardon Heat Pump Repair Tip: How to Handle Your Finicky Heat Pump

Monday, February 13th, 2012

Your Chardon home’s heat pump is designed to keep you comfortable. Warm weather, cold weather – it doesn’t matter. It should turn on when you need it and turn off when you don’t. So, when the device starts turning on and off without reason or when you need it to stay on, what exactly is the problem and how can you fix that problem without losing the heating or cooling capacity of your device.

 Common Causes of the Problem

There are a number of reasons why your heat pump would turn off shortly after turning on, and most of the time this occurs in heating mode. If it occurs in cooling mode, you should have the device inspected immediately because there is likely something wrong with a core component like the compressor. For heating mode issues, here are some common problems:

  • Dirty Coils – If the coils are dirty, the device won’t be able to properly operate, especially if it has been some time since the last cleaning. Both sets of coils need to be cleaned at least once a year to avoid this becoming a problem.
  • Low Refrigerant Charge – If the refrigerant gets low, you’ll need to have it recharged because the pressure in the device will drop and it will therefore turn off after a few minutes of use.
  • Defrost Timer – If the defrost timer is forcing the device into a defrost cycle too often (usually it is set to 30, 60, or 90 minutes), the fan might turn off every few minutes after turning on. This is a common problem and is usually due to a thermostat or switch issue which can be fixed relatively easily.

Another thing to ask yourself when this problem occurs is whether the device is heating properly when on. Defrost timer issues don’t usually impinge on the heating ability of the device, while low refrigerant can. You want to make sure the device is working properly when on and not just cycling on and off without heating capacity.

Based on what you find, you’ll need an Apple Heating & Cooling technician to take a closer look and ensure everything is working properly. Most repairs for this type of problem are relatively simple.

Tags: , , , , ,
Posted in Services | Comments Off

How to Replace a Thermostat: A Tip from University Heights

Friday, December 2nd, 2011

There are a lot of common household tasks that do-it-yourselfers can handle beyond changing light bulbs or replacing a fuse in their University Heights homes. One of those is changing out a thermostat. The reasons for replacing a thermostat can vary from making an upgrade to changing out a thermostat that is not working right – or at all. Whatever the reason, the task is pretty simple and require s very little time and very few tools.

Let’s set the stage.

The materials you will need are the replacement thermostat, wire connectors, electrical tape (optional), needle nose pliers, and a screwdriver.

Here are the steps:

  1. Turn off electrical power to the existing thermostat. You can do this by flipping a breaker switch or removing a fuse from your home’s electrical panel. This would be a good time to make a note of the circuit’s location, writing the circuit number on the panel door or using a sticker.
  2. Remove the cover from the existing unit. You should be able to locate the screws that hold it to the wall mounting plate. Remove the screws and pull the unit away from the wall and mounting plate. Be careful not to touch the electrical wires together on the thermostat.
  3. Disconnect the wiring. Carefully remove the electrical wiring from the unit and keep the wires apart. You might want to tape the bare ends and also ensure that the wires don’t fall back through the wall. If the wires are not color coded, mark each one and which terminal they were removed from. Remove the mounting plate.
  4. If you are using a new mounting plate, make sure it fits over the existing hole and then pull the wires through the opening of the plate. Make sure the mounting plate is secured to the wall with the proper screws.
  5. Now match the wires to the terminals on the new thermostat. The wires are usually color-coded but if not, make sure you attach the right wires to the corresponding numbered terminals on the next thermostat. A green wire, which operates the furnace fan blower, is connected to the “G” terminal. The white wire operates the heater and attaches to the “W” terminal. The yellow wire operates the air conditioner and connects to the “Y” terminal. Use a wire nut to secure the wires and keep them apart from other wires. Ignore any other wires coming out of the wall as they are not necessary and may have been added by the original builder for other purposes.
  6. Carefully move the wires back into the wall as you line up the new thermostat on the mounting bracket. Install the new bracket and secure the thermostat to the bracket.
  7. Turn your power back on and check your thermostat by setting the temperature high or low, to engage the furnace or air conditioner.

This simple procedure can be done in less than 10 minutes. But if you have any doubts and want greater peace of mind, call a professional heating and cooling contractor to perform the installation.

Tags: , , , , ,
Posted in Services | Comments Off

Benefits of Replacing Your Furnace: A Tip from Beachwood

Friday, November 4th, 2011

You are about to make one of the largest purchases in your life – a new furnace. Maybe your old furnace is on life support and needs immediate replacement or you are looking for a better, more efficient furnace that will raise the comfort level of your Beachwood home while reducing utility bills and carbon emissions.

If the furnace in your basement, crawl space, or attic is 15-20 years old, it may be a single-stage 80% percent efficient model, which doesn’t meet the higher efficiency standards of today’s models. It uses more energy, i.e. gas, oil, or electricity, to operate. And a single-stage furnace does not always provide even heating to all rooms in the home, based on the varying winter weather conditions. There may be large temperature variations from room to room.

Your new furnace will likely be more efficient and environmentally friendly than the one it is replacing – which are the two biggest benefits to replacing an old furnace. So, let’s take a closer look at these benefits, which link energy efficiency to the latest technology – namely two-stage furnaces and variable speed motors.

Two-stage furnaces start out by running in a first stage, which uses less than 70% of its capacity. This stage works well on moderate winter days. On colder days, the furnace will meet your extra heating demand by adjusting to the second stage in the heating cycle. Since the furnace spends most of its time operating in its lower capacity (first or single stage), it burns less fuel than a traditional furnace that always runs at full capacity and then shuts off when heating demand is met. You will see lower utility bills and a shorter payback period on your new furnace investment.

Variable-speed motors can actually save you money on your energy bill as they consume less electricity than standard motors. Variable speed furnaces save you money by having a higher SEER rating. SEER is the abbreviation for seasonal energy efficiency ratio. The higher the SEER, the more energy efficient the unit. The low operating costs of a variable speed furnace can allow you to run your furnace blower. With the low operating costs of the variable-speed furnace you can constantly run your blower without the worry of driving up your utility bill, allowing for continuously filtered air.

The U.S. government, as well as local governments are making it more tempting for homeowners like you to purchase new energy efficient furnaces, too. Government agencies have been offering tax credits to homeowners who switch to energy-efficient appliances, including heating and cooling products. Utility companies also offer rebates to homeowners who wish to lower their utility bills by using high-efficient appliances. Chances are, your local utility has some type of rebate program in place.

And when you shop for a new furnace, look for add-on equipment such as electronic air filters and programmable thermostats. Each will raise the comfort level you will be enjoying from your new furnace.

Tags: , , , , ,
Posted in Services | Comments Off

What Size Furnace is Right for My Home? A Question from Chardon

Monday, October 10th, 2011

When it comes to your Chardon home’s heating equipment, the right size is very important. If your furnace is sized correctly, you will enjoy a high level of indoor comfort, which you should. However, an incorrectly sized furnace may result in many cold spots in your home, an overworked furnace, or higher utility bills.

An undersized furnace will turn off and on frequently, which is called short cycling. Short cycling can lead to moisture in the system, causing less efficiency and damage to equipment from accumulating moisture in the heating system. The constant cycling adds to wear and tear on equipment, too. An oversized furnace may not be able to keep up with the demand for heat during the coldest days. The furnace may be constantly running and unable to keep up – adding to higher utility costs. So size really does matter when it comes to selecting the right heating equipment for your home.

But a big furnace does not mean it is right-sized. Have you ever seen a “five-way” gravity furnace? It was manufactured in the mid-1900’s and took up a lot of room – as much as half of a basement – while being extremely inefficient. The key here is efficiency. A furnace that works right is sized to the space it is heating, which does not include attics, crawlspaces, or uninsulated rooms (porches, mud rooms, etc.).

A furnace must make efficient use of its Btu’s, which is abbreviated for British thermal unit. Btu is used to measure a furnace size. Furnaces are often rated by input Btu, which is the amount of energy consumed when running. The output Btu may be different based on the system. And output Btu is the best way to select a furnace, since this is the actual heating capacity.

When sizing a furnace, the first thing to do is to determine the inside space that will be heated. If you are looking to heat your home, you can measure the square footage of each room (multiply width by length). The rooms should include bathrooms and hallways but exclude attics and crawlspaces. Add up the totals and match up the Btu output to the total square footage. If you aren’t sure of your calculations, call a qualified heating and cooling contractor.

There are many factors that go into heating a home and today’s energy efficient furnaces give homeowners many more choices. Whatever furnace you choose to purchase, make sure you do your homework and hire a qualified professional HVAC contractor to determine the best size furnace for your home.

Tags: , , , , ,
Posted in Services | Comments Off

The Preventative Maintenance That Will Save You the Most: A Guide From Chardon

Wednesday, September 21st, 2011

Having a high performance, energy efficient HVAC system will save you a good deal of money in terms of your monthly heating and cooling bills in Chardon. But that efficiency will not last unless you also take the necessary steps to keep your equipment in good working order. While regular maintenance visits from a professional HVAC technician are an important part of this, there are also several things you can do on your own to keep your equipment running at peak efficiency.

  1. Keep it Clear – The first thing you should do is to make sure that there is plenty of space cleared around your outdoor unit. Whether it is the condenser and compressor for your air conditioning system or part of your heat pump, that outdoor equipment needs to have plenty of space to vent hot air. Also, the space will mean that debris is less likely to develop inside the unit.
  2. Clean the Condensing Coil – While your technician will do this when they make their annual visit, it is best to clean your coil more than just once a year. Just make sure that the power is turned off to your unit before you begin. This will help the unit cool air more efficiently and can prevent a whole host of other problems from developing.
  3. Check on the Blower – If your blower is not working right or the blade is clogged, your HVAC unit will not work properly. Make sure your blower fan is free of all debris and that is turns freely once you have cleaned it. If you are still having a problem with it, you may have to call a technician for repairs. Cleaning the blower out on a regular basis, however, should keep this from becoming a problem you need a professional for.
  4. Air Filters – You should also make sure you change your air filters regularly. This can help to keep your indoor air clean and healthy and it will also enable your HVAC system to run more efficiently.
  5. Clean it Out – Clean out any debris that you can reach from any part of your system. Just make sure any time you work inside your HVAC system that you have all of the power turned off. Anything from leaves to dust can get in there and cause a problem if it is allowed to build up over time. As long as you are on top of things and keep to a regular schedule of maintenance, none of this should take you very long.

Tags: , , ,
Posted in Services | Comments Off

Top 4 Upgrades For Your HVAC System: Some Suggestions From Lyndhurst

Friday, August 26th, 2011

Your HVAC system is a trusted part of your Lyndhurst home’s comfort system. Without it you would be cold in the winter, hot in the summer, and breathing in contaminant laden air year round. So, it’s important that you install the best systems and subsystems available for your HVAC system. Here are some options to keep in mind when looking for ways to get the most from your heating and cooling.

  • Humidity Control – Don’t rely on your air conditioner to remove humidity in the summer. A dehumidifier is more energy efficient and reduces stress on your air conditioning system when the humidity gets high. In the winter, humidification allows your home to hold more heat, effectively increasing the efficiency of your heating system.
  • Air Filtration – Every air conditioning system and furnace comes with some form of air filtration, but is it enough? Standard filters are effective, but they are not always comprehensive. A good HEPA quality filter for your air handler and duct system will severely reduce the number of contaminants in your air supply and ensure that you and your family feel much better year round.
  • Ductwork Upgrades – If your ductwork is old, battered or starting to show its years, an upgrade may be in order. If nothing else, having your ductwork cleaned on a regular basis removes excess mold, dusty, pollen, debris and other pollutants that can affect your health and the quality of the air you breathe. Schedule annual cleanings of your ductwork and a biannual inspection to check for cracks and leaks.
  • Air Quality Controls – Beyond air filtration, you can upgrade your air handler’s ability to remove pollutants with a dedicated air cleaner and UV lights. These systems are installed in your air handler and/or ductwork to remove advanced pollutants like bacteria and mold and remove smaller particles including smoke, gas, and exhaust. Which system you need will depend on the level of contaminants in your home, so make sure you check with a contractor before choosing anything.

These upgrades are a great way to get more out of your HVAC system – in terms of both comfort and safety. Discuss your options with a contractor today to learn more.

Tags: , , , , , , ,
Posted in Services | Comments Off

Improving the Energy Efficiency of Existing Windows

Friday, June 24th, 2011

There is a lot to be gained by purchasing energy efficient windows. They can help keep your temperature regulated air in and prevent outside forces from causing your HVAC system to work harder to keep your home comfortable. In some cases, it may make a lot of sense to replace your existing windows with newer, more energy efficient ones, but that is not always a viable option.

So what can you do instead? There are actually quite a few steps you can take to improve the energy efficiency of the windows you already have. For starters, it is a good idea to make sure that all of your windows also have storm windows in place. Storm windows are not necessarily the best, most insulating things you can buy, but they do provide an important extra barrier against air moving between the indoors and the outdoors.

And not all storm windows are created equal. You can certainly opt for the cheapest kind out there, or you can pay a bit more for a product that actually offers a bit more protection against the elements. You will also have to decide whether you want to go for the type of storm windows that are installed on the outside of your existing windows or on the inside. In general, the indoor windows are the best choice, particularly for windows above the ground floor because they are easy to put in and take out and they provide a better seal against the outdoors.

That is not the only thing you can do to improve the energy efficiency of your existing windows, however. Another important step to take is adding weather-stripping around the windows and caulking any areas where air could come through. Even the smallest cracks can cause large losses of heated air in the winter and cooled air in the summer, so making sure there is a good seal all around should be a top priority.

Another option worth considering is the application of one or more different window treatments. There are high-reflectivity films you can put on your windows that will help bounce the sun’s heat away from your home. You can also opt for more traditional sun blockers like awnings and blinds that will keep the sun from penetrating indoors and heating up your rooms all summer long.

Tags: , , , ,
Posted in Services | Comments Off

What to Do if Your Ceiling Fan Does Not Work

Monday, June 13th, 2011

A ceiling fan is a great addition to your home. It can keep you cool all on its own on moderately warm days and it will help to take on some of the cooling load even on days when you do need to use the air conditioner as well. Plus, you can even use your ceiling fan in the winter to keep the warm air from your heating system circulating properly.

But just like anything else, your ceiling fan will encounter some sort of problem from time to time. While there are certainly some things that you cannot fix on your own, it is a good idea to check on a few items before you call in a professional repair person.

For instance, if you switch on the fan and nothing happens, make sure that all of the controls are in the place they should be. Most ceiling fans have a chain or dial on the body of the fan itself that controls the direction that the fan turns and can even turn it off. However, there is usually also a power switch on the wall. If you flip the switch and the fan does not turn on, there is a good chance that the setting on the fan itself is in the off position.

After ensuring that all of these switches and controls are calibrated properly, you can also take a look at the fuse and the breaker that the fan is connected to. If the breaker is thrown or the fuse is blown, the fan is not getting power and you will have to replace the fuse or reset the breaker to restore power to that circuit.

If that does not solve the mystery either, you may want to test the blades themselves to see if they seem to be stuck on a physical impediment. Ceiling fans do occasionally need to have their bearings lubricated and this is a relatively simple task that you can carry out on your own as well.

However, if none of these actions seems to solve the problem, then you will probably need to call in a professional to assess the situation and make the necessary repairs. There may be a mechanical problem within the fan itself or the wiring could be frayed or fused and these are not repairs you should attempt to make on your own.

Tags: , , ,
Posted in Services | Comments Off

What Is the Single Biggest Money-Saver Upgrade You Can Make?

Friday, April 15th, 2011

While it would be great if there was a simple answer to this question, the real right answer depends to a great extent on your own particular situation. There are literally dozens of steps you can take to save on your home heating and cooling costs, and which ones are most appropriate for you will have a lot to do with what you already have, how you use it and where you live.

For instance, if you have a well-insulated house but your HVAC system is more than 10 or 15 years old, investing in a new system will almost certainly save you a ton in the long run. Even if your existing system is working well, the newer systems available are simply so much more energy efficient that having one will cut your monthly bills dramatically.

Plus, you will be replacing your system relatively soon anyway if it is that old, so you might as well start saving now on your heating and cooling costs. However, even the best heating and cooling system on the market will not save you that much money if you do not have a properly insulated and sealed house.

Insulation keeps the warm air in during the winter, and it also keeps colder air from seeping in. In the summer, it works the other way around, keeping in the air you are paying to cool and keeping out the hotter outside air. If you do not have thorough insulation or if it is too old, that temperature controlled air that you are paying for will be leaking out and unwanted outdoor air will be finding its way in. You will pay much more than necessary to keep the indoor temperature comfortable as a result.

If you have both good insulation and an energy efficient HVAC system, your thermostat might be the place to look when you want to try and cut your energy costs. A programmable or wireless thermostat might be just the ticket you need to cut back even more on your energy bills because of the added control it gives you to more precisely regulate the temperature inside your home.

Particularly if you have a large house, you might even consider having a zone control system put in so that you can set different temperatures for different areas of the house. After all, there is no need to be paying to regulate the temperature in a part of the house that is unoccupied.

Tags:
Posted in Services | Comments Off